思科系统中国研发中心最新招聘

思科系统中国研发中心最新招聘
发信站: 饮水思源 (2007年01月31日21:57:28 星期三)

Cisco Systems CRDC (China Research & Development Center) has following open positions:

AABU: Junior Board Designer
AABU: Senior Board Designer
DSBU: HW Engineer III
DSBU: HW Engineer II
DSBU: Mechanical Engineer
DSBU: Feature Test Engineer
DSBU: Electrical Engineer - CAD Application
DSBU: Electrical Engineer - CAD Library
DSBU: Team Leader
DSBU: Electrical Engineer/Technician
DSBU: Power/Analog Engineer/Technician
DSBU: Mechanical Engineer/Technician
DSBU: Test Engineer
SPRTG: Hardware Engineer (ASIC/FPGA Design Verification Engineer)

If you are interested, please send your resume in English and Chinese to:
stephan_lu2000@

Job descriptions are listed below:

AABU: Junior Board Designer

Job Description
- Board Designer on a project team of engineers involved in the specification, design, development, test, and release to manufacturing of Cable router hardware.
- Assist senior HW Engineer in writing board functional and design specifications.
- Develop well-defined hardware modules.
- Perform well-defined unit and product level testing (including lab test equipment set up and documenting test results)。
- Debug medium complexity board level problems.

Skills Required
- Good background in networking concepts.
- Prior experience in board level design.
- Knowledge in VHDL or Verilog.
- Experience with high speed digital design and signal integrity a plus.
- Experience with schematic capture tools.
- Proficiency with test equipment (logic analyzer, oscilloscope).
- Ability to solve routine problems at the module or multiple module level, based on knowledge of debugging and testing concepts.
- Excellent written and verbal communications, team and people skills.

Educational Background Recommended
- BSEE or equivalent with 2-3 yrs relevant experience.

 

AABU: Senior Board Designer

Job Description
- Participate on a project team with engineering, marketing, and manufacturing to specify, design, development, test and release Cable router hardware.
- Responsible for board level complex architecture design.
- Write board level functional and design specs.
- Design complex hardware modules and moderate complexity FPGAs.
- Debug complex board level problems.
- Perform complex board level unit and integration testing.
- Consult with in-house compliance and MFG engineers during design process to ensure compliance and MFG requirements will be met.
- Resolve issues with CAD, Compliance and MFG Engineers in developing new boards.

Skills Required
- Ability to widely apply networking principles, theories and field concepts to product development.
- Experience and past success taking a design from concept to full production at a Contract Manufacturer.
- Experience performing board level digital logic design, as well as moderately complex FPGA design and simulation.
- Knowledge and experience in high speed digital design and signal integrity.
- Experience with microprocessors, high speed memory, PCI, Gigabit Ethernet and high speed bus design.
- Experience with schematic capture tools.
- Proficiency with test equipment (logic analyzer, oscilloscope).
- Able to develop and execute thorough test plans and debug strategies.
- Excellent written and verbal communications, team and people skills.
- Able to mentor junior team members.

Educational Background Recommended
- MSEE combined with 4-5 years of related experience, or BSEE combined with 5-7+ yrs related experience.

 

DSBU: HW Engineer III (System Engineer with 5+ years experience)

JOB DESCRIPTION AND RESPONSIBILITIES

 Participates on a project team of engineers responsible for the specification, design, development, test, enhancement, and sustaining of networking hardware.
Responsible for board level architecture design and writes functional specs. Develops complex circuit designs for multiple modules incorporating newly developed custom ASICs.
Designs moderate complexity programmable logic or FPGA. Responsible for the evaluation, selection, and qualification of complex components that may include newly developed technology.
Partners with CAD and Manufacturing Engineers in developing new boards. Identifies and develops board level simulations where necessary.
Work independently without direction but also interface with team members of ASIC, System Software, Diagnostic Software, and Mechanical Engineering.
Consults with packaging and other compliance engineers during design process to ensure compliance requirements will be met. Writes board level functional and design specs and hardware manuals.
Performs complex board level unit and integration test. Debugs complex problems at the system level. Provide guidance and leadership to test team members of Hardware DVT, Mechanical DVT, System Test, and Regulatory Compliance.
Writes complete unit and integration test plans.
Mentors more junior engineers in the completion of complex tasks. Participates in defining the design and implementation processes and procedures. Participates in Cisco’s patent program.

REQUIRED KNOWLEDGE, SKILLS & EXPERTISE

 Expertise developing printed circuit boards for digital systems.
Skill using schematic capture tools like Mentor Graphics’ ePD/DxDesigner (Viewdraw).
Expertise using Networking silicon: PHYs, MACs, and Network Processors.
Skill utilizing FPGAs, Verilog or VHDL language, simulations, timing analysis, and back-end compilation.
Expertise with high speed SerDes design, PLL design and LVDS, LVPECL, CML and other high-performance I/O technologies.
Familiarity with board level simulations for signal integrity, power integrity, and timing analysis. Expertise correlating simulation results with lab measurements using oscilloscopes, TDRs and spectrum analyzers.
Knowledge of power systems, power supplies, and DC-to-DC regulation concepts and components.
Expertise designing to and testing for regulatory compliance: Safety, EMC, and Environmental. Expert knowledge of PCB technology.
Skill resolving problems at the system level. Expert knowledge of networking principles, theories and commonly used concepts.
Skill in the application of old and new networking technology into complex designs.
 Basic knowledge of ISO9001 and it's implications on development environment.
Some knowledge or skill writing or maintaining diagnostics firmware.
Desirable skill planning projects with a good understanding of product life-cycle methodology.
Desirable skill in protecting intellectual property through patents.
Desirable expertise partnering with marketing, customer engineering, or sales and incorporating customer inputs into product direction and priorities.
Desirable skill presenting confidently in front of a large group.

DESCRIPTION OF THE JOB APPLICANT 
 Understands the product level and related product level architecture (for example: competitive products). Works under department strategy and direction. Translates department goals into own work assignments and prioritizes accordingly. Independently determines and develops approach to solutions. Work is reviewed upon completion for adequacy in meeting objectives. Sponsors and models exemplary team interaction. Shares information and communicates clearly to team members and cross-functional teams. Encourages and accepts performance feedback. Problem solving requires creativity and ingenuity using knowledge gained from experience. Exercises broad judgment. Promotes cooperation between team members and resolves conflicts. Demonstrate Leadership. Acknowledged technical expert on products developed. Innovation and Learning. Dedication to Customer Success.

REQUIRED EDUCATION AND JOB EXPERIENCE
 BSEE combined with 5+ yrs related experience, or an MSEE combined with 4+ years of related experience. Recent direct experience developing numerous printed circuit boards, including participation in each of these activities: concept and architecture, circuit design, component selection, schematic capture, timing and power analysis, CAD layout, fabrication, debug, testing, and release to production.

KEYWORDS
 Networking, Hardware, Board Design, Digital Design, Circuit Design, Schematic Capture, System Engineer, Design, Project Leader, PCB; Printed Circuit Board, Timing Analysis, Signal Integrity, Board Simulation, Regulatory Compliance, EMC, Viewdraw

 

DSBU: HW Engineer II (System Engineer with 2-5 years experience)

JOB DESCRIPTION AND RESPONSIBILITIES
 Participates on a project team of engineers responsible for the specification, design, development, test, enhancement, and sustaining of networking hardware. Contributes to board level architecture design and writes functional specs. Develops complex circuit designs for multiple modules (with supervision). Partners with CAD and Manufacturing Engineers in developing new boards. Work under direction from a project leaders but also interface with team members of ASIC, System Software, Diagnostic Software, and Mechanical Engineering. Writes major portions of design specifications and hardware manuals. Performs complex board level unit and integration test. Debugs problems at the board level. Interfaces with test team members of Hardware DVT, Mechanical DVT, System Test, and Regulatory Compliance. Writes major portions of unit and integration test plans. Follows standard design and implementation processes and procedures.

REQUIRED KNOWLEDGE, SKILLS & EXPERTISE
 Skill developing printed circuit boards for digital systems. Skill using schematic capture tools like Mentor Graphics’ ePD/DxDesigner (Viewdraw). Expertise resolving problems at the module or multiple module level, based on knowledge of debugging and testing concepts. Knowledge of PCB technology. Basic skill with circuit board debug and test equipment. Working knowledge of Internet and networking products and technologies. Limited skill in the application of basic networking theories and concepts.
 Basic understanding of ISO9001 and it's implications on development environment. Desirable knowledge of Networking silicon: PHYs, MACs, and Network Processors. Desirable expertise with FPGAs, Verilog or VHDL language, simulations, timing analysis, and back-end compilation. Familiarity with high speed SerDes design, PLL design and LVDS, LVPECL, CML and other high-performance I/O technologies. Desirable skill performing board level simulations for signal integrity, power integrity, and timing analysis. Desirable skill correlating simulation results with lab measurements using oscilloscopes, TDRs and spectrum analyzers. Familiarity with power systems, power supplies, and DC-to-DC regulation concepts and components. Desirable knowledge designing to and testing for regulatory compliance: Safety, EMC, and Environmental. Some knowledge or skill writing or maintaining diagnostics firmware.

DESCRIPTION OF THE JOB APPLICANT
 Understands product level architecture. Ability to develop complex designs. Ability to multitask. Works under general supervision. Follows established procedures. Work is reviewed for soundness of technical judgment and overall adequacy and accuracy. Teamwork. Excellent written and verbal communications, team and people skills. Shares information and communicates clearly to team members. Encourages and accepts personal feedback. Uses acquired professional knowledge to work out problems and make sound technical decisions. Exercises judgment within defined standards and consults with management. Promotes cooperation between team members. Innovation and Learning. Dedication to Customer Success.

REQUIRED EDUCATION AND JOB EXPERIENCE
 BSEE combined with 2-5 yrs related experience, or an MSEE combined with 1-4 years of related experience. Recent direct experience developing a printed circuit board, including the involvement in each of these activities: concept and architecture, circuit design, component selection, schematic capture, timing and power analysis, CAD layout, fabrication, debug, testing, and release to production.

KEYWORDS
 Networking, Hardware, Board Design, Digital Design, Circuit Design, Schematic Capture, System Engineer, Design, PCB; Printed Circuit Board, Timing Analysis, Signal Integrity, Viewdraw

 

SPRTG: Hardware Engineer (ASIC/FPGA Design Verification Engineer)

Job Description:
 Participate in architecture and design verification of complex networking ASIC.  Responsibilities include:
- Architecture/Micro-Architecture definition
- Standalone and Integrated functional verification;
- Documentation and review of Verification architecture and testplans
- Develop verification environment (models, checkers, packet manager) using Specman/Vera
- Develop random, pseudo-random and directed tests
- Establish verification effectiveness using assertion/functional/code coverage and code reviews
- RTL and gates simulation, debug and root cause
- Regression triage and debug
- Formal verification and equivalence checking.
- Lab debug and design validation

Skills required:
- Prior significant verification experience on complex ASICs. 
- Good background in networking concepts. 
- Experience with Vera/Specman and Verilog. 
- Chip and system and test experience. 
- Programming and scripting skills.
- Good planning skills (well partioned designs, well organized code)
- Outstanding written and verbal communication skills
- Capability of critical thinking, challenging design intent

Education:
 MSEE with 5+ yrs or BSEE/CS  with 7+ yrs relevant experience

 

DSBU: Mechanical Engineer

Job Description Skills Required
 Assumes a complex role on project team involving the entire system packaging process.  Assists in the design and documentation of computer enclosures and related electro-mechanical assemblies using solids modeling techniques. Conceptualizes, plans and executes the design and development of switch packaging products. Consults with cross-functional groups for product requirements, definitions and design.  Defines, directs and participates in the design verification and testing of new products.
- Direct electronics industry experience, skilled in the art and science of electronics packaging at the board, box and rack level.
- Selects electro-mechanical components such as air movers, heatsinks and complex interconnection systems. Determines form factors, raw materials, finishes and manufacturing processes.
- Proficiency in developing conceptual and production designs using UG NX and Ideas SDRC 3-D solids modeling software, 4000hr plus of recent experience.
- Has experience in the design and development of tooling for high volume sheet metal, plastic and die casting.
- Expertise in designing high volume, cost effective products that meet worldwide customer, regulatory and compliance requirements.
- Thermal management and structural design expertise. Proficiency using Flotherm for CFD thermal simulations and in structural analysis software such as Ansys, Nastran, Cosmos, etc.
- Able to generate test plans, conduct tests and generate test reports for Thermal and MDVT.  Understanding of Safety Agency design criteria and EMC design techniques for modules and enclosures.
- Responsibilities include initiating informal reviews of ideas and technical objectives within and across cross functional groups.
- Develops schedules for medium to large tasks and may be required to manage remotes development activities.  Working knowledge of Project Management process and schedule tools, Microsoft Project.
- Skilled with Microsoft Excel, Power Point, Word, etc.
- Resolves field and production problems.  Participates in cross-functional consultation with Customer Advocacy, Manufacturing, Contract Manufacturing, Marketing and Hardware Engineering.
- Fluent English, exceptional written and verbal communication skills
- Grace under pressure and a positive attitude are mandatory.
- Demonstrates ability to successfully influence win-win cross-functional dynamics. Resolves conflicts by fostering team communications.
- Enjoys working in a fast paced and often multi-project environment. 

Educational Background Recommended
 Typically requires BSME or equivalent training with 7-10+ yrs related exp. Preferred: MSME/PhD or equivalent.
 
Keywords by Emphasis:
 Mechanical Design
  Electronics Packaging, PCB, Enclosure, Rack, Cabinet, Sheetmetal (or Sheet Metal), Die cast, Plastics, Injection Molded, EMI, Connectors
  Interconnect, Solids modeling, MCAD, Unigraphics NX, SDRC, High Volume, Complex Assembly, Tolerance Analysis, Structural integrity, MDVT, Shock, Vibration, Microsoft Project

 Thermal Design, Analysis, and Test
  Electronics, Heatsink, Flotherm, Air Flow, Forced Convection, Natural Convection, Radiation, Thermocouple, Anemometer, Thermal interface, Chip, Chip Package, Air Volume, Data Acquisition

 Structural Design, Analysis and Test
  Shock, Vibration, Modal Analysis, Ansys, Nastran, Cosmos, MDVT
 

DSBU: Electrical Engineer - CAD Application

Job Description
 This position is responsible for complete, quality design of complex, dense, high-speed, high volume, double sided surface mount printed circuit boards using Cadence Allegro, Specctra and Destiny routing tools and DFM (Adiva or Valor) verification tools. You will work closely with hardware engineers to implement design requirements of highly complex board layouts. You will also work closely with compliance, thermal, mechanical, safety, ICT and manufacturing engineers to ensure that Cisco standards for quality, DFM / DFA / DFT, safety and compliance are met. You will provide the project team with design schedules and status updates.

Skills Required
- BSEE with 5+ years, or MSEE with 3+ years, of experience working with Cadence Allegro tools
- Extensive experience in PCB design including placement, routing and fab/assembly/post process documentation.
- Knowledge of PCB construction and experience in PCB design utilizing surface mount, high-density double-sided technologies and the latest fabrication technologies such as HDI, micro-via and alternative board materials.
- Familiar with EMI compliance considerations, high-speed signal integrity challenges, critical net routing, thermal and mechanical issues as well as design for high volume manufacturability and test.
- Extensive expertise with either Cadence or Mentor design tools, including either Specctra or Destination autorouters is required. 
- Rich independent working experience of high speed signal routing and integrity challenges, general EMC and high volume FAB design is required. The strong knowledge of HDI design, PCB fab process and advanced technologies is also requested.
- Fluent communication skills in English, both written and verbal.
- Experience with Valor and/or Adiva DFM/DFA tools is preferred.  Experience with micro (0.8mm) BGA and micro-via/HDI technology is a plus.

 

DSBU: Electrical Engineer - CAD Library

Job Description
 Candidates will work closely with all disciplines of the hardware design arena to implement requirements from the High-end Router Library Development team, HW engineering, power, mechanical, and manufacturing to insure that both the design requirements and Cisco producibility standards for PCB fabrication, assembly and test are met.  Engage with entire Project/Library teams to provide schedule estimates, design status, communicating challenges, presenting solutions.

 You will be responsible for mining datasheets within Cisco and externally to be used for all symbol creation and datamining for other design tools to leverage.   You will create logic symbols used for schematic capture which adhere to Cisco design standards and test them through PCB for verification purposes, build and design physical footprints to industry and Cisco standards for all technologies.  You will also provide the library team with options when design requirements create design and manufacturing conflict and compromise is necessary.

Skills Required
- BSEE with 5+ years, or MSEE with 3+ years, of Library and PCB industry related experience
- Have expertise with Mentor’s EPD DxDesigner/DxDatabook schematic capture tool, and Cadence Allegro Version 14.X or above. 
- Experience with design, testing and verification of production library components a requirement.
- Prefer expertise working in a PC environment using the Mentor and Allegro Toolsets.
- Excellent communication skills in English, both written and verbal.
- The ability to work in a fast paced, geographically distributed team environment that is continual improving itself and seeking ways to evolve to meet today's and tomorrow's design challenges is a must.

 

DSBU: Team Leader (Senior Electrical Technician with PM skill set)
? 
Responsibilities
- Resource planning, staffing and coordination
- Based on build forecasts from Proto PM for prototype bringup
- Based on program test resource requirements from HW Test Manager and Systems Engineering Managers
- Proto build coordination with Cisco Proto PM
- Test, distribution and tracking
- Implement ECOs and retest and redistribute
- Unit configurations - establish and insure adherence
- Electrical Technician responsibilities (see Electrical Engineer/Technician)

Skills Requirements
- Organizational/Management Skills
- Task Prioritization
- Resource Planning/Staffing
- Presentation Skills
- Electrical Technician skill requirements

Education/Experience
- Electrical Technician education/experience
- BSEE with 8+ years of hardware build bringup, evaluation and troubleshooting
- 5+ years of project and resource management experience related to hardware build bringup, test and distribution
- Proficient in the use of Microsoft Project and Excel

 

DSBU: Electrical Engineer/Technician

Responsibilities
- Prototype bringup, test and debug
- Engineering support - design evaluation, circuit tuning, issue resolution
- Product Test and Qualification
- High speed signal measurements (Signal Integrity and PHY Qual)
- Technical judgment - assessment of measurements against criteria
- Test results reports

Skills Requirements
- Ability to read and interpret complex electrical schematics
- Ability to read and interpret industry standards - such as IEEE 802.3
- Ability to use a wide range of high end test equipment
- Oscilloscopes, Logic Analyzers and Network Analyzers
- Traffic Generators
- Programmable Power Sources and Power/Thermal Test Equipment
- Fluke Meters and Data Recorders
- Ability to troubleshoot/root cause advanced electronic circuits
- PLLs and DLL’s
- Computer subsystems and interface systems - PCI bus
- Memory bus systems and TCAMs
- Copper and Optical Transceivers
- Ability to write test plans and execute test plans
- Strong Communication Skills
- Excellent English
- Strong Oral and Written Skills

Education/Experience
- BSEE with 5+ years of hardware design bringup, evaluation and troubleshooting
- Working knowledge of digital hardware systems
- Working knowledge of transmission lines
- Proficient in the use of Allegro and View Logic
- Proficient in the use of Microsoft Word and Excel

 

DSBU: Power/Analog Engineer/Technician

Responsibilities
- Power Supply Qualification (component level, AC-DC and DC-DC), Power DVT (system level), test and debug
- Power Engineering support - design evaluation at component and system level, circuit evaluation, issue resolution
- Product Test and Qualification
- Power Supply qualification, System current, power, voltage drop, stability, etc.,  measurements, overall power design qualification at the system level
- Technical judgment - assessment of measurements against criteria
- Test results reporting (Test Tracker, Power Point presentations)

Skills Requirements
- Ability to read and interpret complex electrical schematics
- Ability to read and interpret specifications and industry standards
- Ability to use a wide range of high end test equipment
- Oscilloscopes, Logic Analyzers and Network Analyzers
- Traffic Generators
- Programmable Power Sources and Power/Thermal Test Equipment
- Fluke Meters and Data Recorders
- Ability to troubleshoot/root cause advanced electronic circuits
- Analog circuit design/knowledge a must
- Ability to evaluate AC-DC and DC-DC circuit designs
- Ability to write test plans and execute test plans
- Strong Communication Skills
- Excellent English
- Strong Oral and Written Skills

Education/Experience
- BSEE with 5+ years of analog or hardware design, circuit evaluation and troubleshooting
- Working knowledge of Analog circuit designs
- Working knowledge of hardware systems
- Proficient in the use of Allegro and View Logic
- Proficient in the use of Microsoft Word, Excel and PowerPoint

 

DSBU: Mechanical Engineer/Technician

Responsibilities
- Mechanical prototype verification - form, fit and function
- Mechanical Engineering support
- root cause analysis of MDVT failures
- building experimental prototype enclosures
- Product Test and Qualification
- Thermal test measurements
- Acoustic Testing
- Connector stress testing
- Coordination of Shock & Vibration testing (MDVT) with Central Test Group
- Coordination of Dye & Pry testing with outside test lab
- Test results reports

Skills Requirements
- Ability to read and interpret mechanical drawings
- Ability to effectively use basic test equipment
- Thermal Test & Measurement Equipment
- Fluke Meters and Data Recorders
- Ability to write test plans and execute test plans
- Ability to properly collect and analyze acoustic, thermal, mechanical data
- Strong Communication Skills
- Excellent English
- Strong oral and written skills
- Concise and accurate technical communication

Education/Experience
- BSME with 5+ years of mechanical design evaluation and troubleshooting
- Experience in executing mechanical and thermal tests
- Proficient in the use of SDRC-Ideas (preferred) and/or Pro-E
- Proficient in the use of Microsoft Word and Excel

 

DSBU: Test Engineer

Responsibilities
- Test development, execution, mitigation and tracking
- Product Test and Qualification
- Automated Corner test execution
- Fault Insertion test execution
- Test results reports

Skills Requirements
- Ability to read and interpret product specifications from components, systems to test equipment
- Ability to write and execute TCL/Expect scripts to validate complex products using a wide range of programmable test equipment
- Ability to read and interpret complex electrical schematics
- Ability to use a wide range of high end test equipment
- Oscilloscopes, Logic Analyzers and Network Analyzers
- Traffic Generators
- Programmable Power Sources and Power/Thermal Test Equipment
- Fluke Meters and Data Recorders
- Ability to troubleshoot/root cause to product functional block level
- Ability to discern test setup/configuration issues from product issues
- Ability to write test plans and execute test plans
- Strong Communication Skills
- Excellent English
- Strong Oral and Written Skills
- Presentation Skills

Education/Experience
- BSEE/BSCS with 10+ years of hardware design validation and troubleshooting
- 8+ years of product test related programming
- TCL/Expect scripting with Cisco Products
- C/C++ programming - communication products preferred
- Working knowledge of Cisco 2K and 3K products a plus
- Basic understanding of routing/switching concepts
- Working knowledge of digital hardware systems
- Working knowledge of transmission lines
- Proficient in the use of Microsoft Word and Excel