精进电动科技（北京）有限公司

1. Power Electronics & Motor Drive Engineer

Duties and Responsibilities

Power Electronics & Motor Drive Engineer/Specialist is responsible for development and design of power electronics control for electric traction motors and power electronics targeted at hybrid and electric vehicle applications.

l         Work involves strong analysis and problem solving skills. Work tasks, objectives and assignment directions are provided by management but the ability to multi-task and work well in a self directed environment are required.

l         Generate technical solutions for complex controls of surface mounted and interior permanent magnet machines, induction machines, and other machine technologies. Generate technical solutions for complex digital controls.

l         Perform simulation and analyses of electric drive components and subsystems.

l         Plan and perform testing, development and calibration in dynamometer facility.

l         Support engineering design development to utilize advances in digital controls.

l         Work with design engineers and manufacturing staff to review new designs and provide succinct input for machine design improvements.

l         Interface with vehicle system customers. Write and evaluate technical reports and proposals.

Requirements And Qualifications

l         Ability to Develop and validate motor control algorithm in a real-time embedded environment.

l         2+ years automotive engineering experience is preferred. Transmission and engine control or CAN-bus experience is a plus.

l         Solidly master dq0 coordinate system and its application on PM, induction or synchronous machines.

l         3+ years motor drives & power electronics controls experience. Expertise on control of converters, choppers, inverters, phase controllers, MOSFET’s and IGBTs is preferred

l         Specialized knowledge in PWM, space vector and six-step control.

l         Experience in modeling/simulation using tools such as Matlab-Simulink, Sabre, Pspice or Ansoft Simplorer  etc.

l         Experience in C/C++ software development and/or control model auto-coding

l         Lab view (or other measurement software) for motor drive system validation test.

l         Ability to work with a diverse team supporting component development and         subsystem and vehicle integration.

l         Skillful knowledge in MS Office (Word, Excel and Power Point).

l         Strong oral and written communication skills in English to accurately communicate cross-functionally.

l         Strong interpersonal skills to work effectively with a team and provide motivation to co-workers.

l         Ph.D. (or experienced Master/Bachelor) Degree in Engineering.

电力电子及电机驱动工程师

工作职责

电力电子及驱动工程师/专家负责应用在混合动力和电力机车中的电力牵引电机和电力电子的控制模块的设计与开发。

l         工作要求很强的分析和解决问题能力，要求可多任务工作和在独立环境下工作。

l         得出表面贴装及内置型永磁电机，感应电机及其他电机技术的综合控制和综合数字控制技术结果。

l         进行电子驱动元件及其子系统的仿真和分析。

l         计划，执行测试，开发，校准功率测试设备。

l         支持数字控制在工程设计开发上的应用。

l         与设计工程师和工程制造人员协同合作，在电机设计改进方面对新设计产品进行检测并简化输入。

l         与汽车系统的客户进行交流，书写评估技术报告和设计方案。

任职资格：

l         可以得出并检验在实时内置环境中的电机控制算法。

l         两年以上车辆工程相关工作经验优先。有传动及机车看控制或者CAN总线经验者更佳。

l         扎实的掌握dq0坐标变化系统及其在永磁电机感应电机和同步电机上的应用。

l         三年以上电机驱动和电力电子控制经验。有变频器，断路器，逆变器，相位控制器，MOSFET和IGBT相关控制经验的优先。

l         精通PWM，向量控制，六步控制法方面的知识及其在电机控制上的应用。

l         具有相关建模仿真分析软件的经验，如Matlab-Simulink, Sabre, Pspice 或者 Ansoft Simplorer。

l         拥有C/C++软件开发和控制模型自动编码的相关经验。

l         可应用Lab-View或其他同类软件对电机驱动系统进行验证测试。

l         可以与一个多样化的小组合作，支持元件开发及子系统合整车的组装。

l         熟练使用MS Office组件(Word, Excel and Power Point)

l         很强的英语口语和书面交流能力，能够准确的进行交叉学科间的交流

l         个人交际能力强，团队工作效率高，并且有工作积极性。

l         相关工科的博士（或者具有丰富经验的硕士/本科）

2. Finite Element Analysis and CAE Engineer

Duties and Responsibilities

l       Performing analytical & finite element structural analysis of mechanical parts and assembly for electric machines and power electronics drives in the automotive vehicle environment.

l       Perform steady and transient thermal FEA analysis of motors and electronics box for hybrid electric vehicles

l       Conceptual design of mechanical parts and interfaces for hybrid electric vehicle system. 

l       Perform component FEA modal analysis and pre-stressed assembly’s FEA modal analysis

l       Perform noise vibration harshness (NVH) analysis as well as product improvement.

l       Familiar with digital signal processing (DSP) technique, applied to time domain as well as frequency domain modal analysis, modal testing including hammer and shaker testing.

l       Familiar with strength of materials theory, elasticity and plasticity, thermal fatigue, mechanical cyclic fatigue, vibration system both discrete and continuous system and heat transfer.

l       Familiar with metal material properties for both mechanical and thermal property, such as silicon steel, carbon steel, grey cast iron, ductile iron, powder metal, aluminum casting and forging. Understand how to implement the property to FEA and design process for aid of product design and material selection

l       Familiar with Solidworks or any equivalent 3D solid package for modeling, assembly

l       Design test plan including test criteria, test method, sample repetition. Review test result and design change recommendation if applicable for product verification, validation or product improvement.

l       Able to explore new technology, develop new advanced analysis method to improve product analysis simulation.

l       Conduct various technical interchange meetings internally and with external team partners.

Requirements And Qualifications

l         A thorough understanding of FEA analysis methods and at least one year practices is required.

l         Demonstrated hands-on experience with ANSYS FEA analysis is also necessary.

l         Strong problem-solving and analytical skills are essential.

l         Knowledge on rotational electric machines and power electronics control.

l         Team player, independent working capability in the related areas, technology leadership. 

l         Oral and written communication skills in Chinese & English language are a must.

l         Experience working in an electromechanical hybrid or automotive product environment would be an advantage.

l         Master’s degree required; PhD preferred. Proficiency in SolidWorks, FEA, and Modal Analysis is required.

l         Conducting structural design trade studies and determining, through failure mode analysis, the key design issues to be resolved.

有限元分析及计算机辅助工程工程师

工作职责：

l         进行解析和机械零件的有限元结构分析以及在汽车车辆的环境中装配的电机和电力电子驱动器。

l         对电机和混合电动汽车执行稳定和瞬态热有限元分析

l         机械部件的概念设计和混合动力电动汽车系统的接口设计

l         执行元件有限元模态分析和预应力装配的有限元模态分析

l         执行严厉的噪音振动（ NVH ）分析以及产品的改进。

l         熟悉数字信号处理（ DSP ）技术，适用于时域和频域模态分析，模态测试，包括锤和振动测试。

l         熟悉材料强度理论，弹性和可塑性，热疲劳，机械循环疲劳，振动系统都离散和连续系统和换热。

l         熟悉金属材料的机械性能和热性能，如硅钢，碳钢，灰铸铁，球墨铸铁，粉末金属，铝铸件和锻件。了解如何执行的有限元分析性能和设计过程中提供援助的产品设计和材料选择

l         熟悉Solidworks的或任何的3D等的建模，装配

l         设计测试计划包括测试标准，测试方法，样品重复。根据产品的适用性，验证或产品的改进，来修改测试结果和设计变更建议

l         能够探索新技术，开发新的先进的分析方法，以提高产品的分析模拟。

l         开展各种形式的内部的和外部的团队合作伙伴的技术交流会议。

任职资格：

l         全面了解的有限元分析方法和至少一年的实践经验。

l         具有ANSYS有限元分析经验

l         较强的解决问题和分析技能是必不可少的。

l         了解旋转电机和电力电子控制

l         团队工作，在相关领域能够独立工作能力，并处于技术领先地位

l         中英文读，写，交流能力

l         具有混合机电或汽车行业工作经验者优先考虑。

l         要求硕士学位;博士学位优先。熟知SolidWorks，有限元分析，模态分析。

l         执行结构设计研究和确定，通过故障模式分析，解决关键的设计问题。

3. Automotive Electric Machine Manufacturing Engineer

Duties and Responsibilities

l         Coordinate prototype and/or low-volume manufacturing of automotive electric machines, including material sourcing, processing, and assembly.

¨         Need to choose proper equipment and cooperating partners or suppliers

¨         Ensure program timing and quality

l         Participate high volume manufacturing of automotive electric machines

¨            Investigate and recommend manufacturing location

¨            Develop requirements for plant and equipment.  Develop investment budget.

¨             Develop Bill of Process.  Estimate manufacturing cost and control the cost.

¨            Support Finance in developing and controlling overall product piece cost

l         Establish quality system and obtain ISO9000/TS16949 Certifications

l         Implement advanced production and quality systems such as Toyota Production System (TPS), Total Quality Management (TQM) and/or 6-Sigma.

Requirements And Qualifications

l         Bachelor’s degree or above.  Electrical, Mechanical, Manufacturing or Industrial Engineering.

l         Minimum 5 year experience in electric machine production and quality system. 

l         Automotive or automotive component manufacturing experience.

l         Familiar with electric machine production process, material, component sourcing, and quality control.

l         Familiar with domestic supply base of electric machine components.  Have good relationship with major suppliers.

l         Excellent English reading, writing and oral communications

l         Highest standard of integrity.  Honest, professional, self-disciplined.  Strong communications, inter-personal and coordination skills.

汽车电机制造工程师

工作职责：

l         协调汽车电机小批量试制的材料选购，加工和组装工作。

¨           选择设备及协同单位或供应商。

¨           保证试制按时完成，并且达到既定的质量要求

l         参与汽车电机中大批量生产。

¨           选择生产地点

¨           制定厂房和设备要求并编制投资预算

¨           制定工艺流程，编制生产成本预算

¨           支持财务部门的成本估算，核算及控制

l         针对汽车电机的特定要求，建立基本质量体系并取得认证（ISO9000，TS16949）

l         建立并实施更先进的制造质量体系，如丰田精益生产体系，全面质量管理体系和6-希格玛等。

任职资格：

l         本科以上学历，电机, 机械，制造或工业工程专业。

l         5年以上电机生产和质量工作经验。

l         汽车或汽车零部件制造经验。先进质量管理体系经验优先。

l         熟悉电机工艺，材料，采购，及质量控制。

l         能悉国内电机供应体系，和零部件供应商有良好联系。

l         出色的英语读，写，交流能力。

l         正直，诚信，敬业，自律，善于沟通，交流和协调

4.  Electric Machine Design & Control Engineer

DUTIES AND RESPONSIBILITIES

l       Electromagnetic design and analysis of electrical machines with lumped-parameter magnetic circuit  and finite-element methods, including induction machines, permanent magnet machines, synchronous machines and other special machines.

l       Innovate new concepts in electric machines in speed-variable environment, and support customer quotes, development project, and production plan.

l       Support mechanical specialist in vibration, noise, and structural analysis of electric machines.

l       Develop new design program/tools for electromechanical systems.

l       Perform thermal analysis of rotating electric machines and components.

l       Assist in troubleshooting product failures in the lab and field and recommend design fixes.

l       Write lab and design procedures/orders as needed to carry out test and design functions.

l       Develop material specifications for electric machines (e.g., hard and soft magnetic materials, insulations, and structure materials).

l       Interface with customers to obtain design requirements and report design/analysis results. 

Requirements And Qualifications

l         Solid electric machine theory and design background. Fully understanding of steady and transient electromagnetic field in electric machines.

l         Organized and structured work-style and attention to detail required.

l         Knowledge on machine’s dq0 transformation, power electronics inverter, converter, and phase controlled rectifier is necessary

l         Knowledge on thermal, structural, vibration and noise of the speed-variable electric machines

l         Must be able to work independently, and/or serve as lead engineer in team working environment.

l         Oral and written communication skills in English language are a must

l         Experience working in an electromechanical hybrid or automotive product environment would be an advantage

l         At least one year of electromagnetic FEA experience is required

l         Excellent background in using CAD or ProE, CAE, and programming languages like C/C++ or Visual-B, Matlab/Simulink etc. for electric machine analysis and design is required.

l         Ability to travel domestically and/or internationally at least 10% is required

EDUCATION AND EXPERIENCE

l         MSME/MSEE is required. Ph.D. is preferred

l         3+ years of experience with electric motors or generators operating at 300-1000V are preferred.

l         Automotive / vehicle component development experience preferred

电机设计及控制工程师

工作职责：

l         电磁设计和集总参数磁路的电机和有限元方法的分析，包括异步电机，永磁电机，同步电机和其他特殊设备。

l         在电机调速环境中创新理念，并支持客户报价，开发项目和生产计划

l         在电机的振动，噪声和结构分析中给机械专家提供支持。

l         对机电系统开发新的设计程序/工具

l         从事旋转电机和部件的热分析。

l         在实验室和现场协助排除故障产品，并提出设计修复建议。

l         编辑所需的实验和设计程序/命令完成测试和设计。

l         制定电机的材料规格（例如，硬盘和软磁材料，绝缘材料和结构材料）

l         符合客户的设计要求和报告设计/分析结果。

任职资格：

l         固体电机理论与设计的背景。充分了解电机中的稳定和瞬变电磁场。

l         有组织和有条理的工作作风，并注重细节。

l         了解机器的dq0转变，电力电子逆变器，转换器和三相可控整流器

l         具备调速电机的热，结构，振动和噪声知识。

l         能够独立工作，或具有领导工程师团队的能力。

l         出色的英语读、写、交流能力。

l         具有混合机电或汽车行业工作经验者优先考虑。

l         至少一年的电磁有限元分析的工作经验

l         熟练使用用CAD或ProE ， CAE技术和编程语言如C / C + +语言或Visual-B ， Matlab / Simulink的等电机的分析与设计

l         10%的国内外出差要求

教育背景

l         机械工程学硕士/电机工程学硕士。博士优先

l         具有3年以上运行300 - 1000V电动机或发电机经验者优先。

l         具有汽车/车辆部件的研发经验者优先。

5. Motor Drive Engineer for Hybrid Electric Vehicles

DUTIES AND RESPONSIBILITIES

l       Define and verify functional and performance requirements for high-voltage electric drive components in hybrid electric vehicles and electric vehicles

l       Design, realize and verify power electronics components such as frequency inverters and dc/dc-converters

l       Specify, propose and test packaging solutions, cooling concepts, IGBT selection, protection concepts and joining techniques for power electronics components

l       Develop microprocessor controller architectures, sensor and communication interfaces, gate driver concepts as well as EMC (electro-magnetic compatibility strategies)

l       Investigate and specify connector systems, filter design and DC bus bar architectures

l       Specify environmental and functional tests, define and support design verification methods for power electronics in dynamometer set-ups and vehicle tests

l       Support quality processes such as FMEA (failure mode effect analysis), DV (development validation) and PV (production validation), issue tracking and version control

l       Interface with suppliers, vehicles customers and partners to meet technical requirements, program timing and cost targets

Requirements And Qualifications

l         Expertise in control of permanent magnet machine, induction machine, and synchronous machine

l         Fully understand dq0 transformation, Six-step, Sine PWM, Space Vector algorithms  in motoring, generating and re-generating controls of electric machines

l         Hardware experience in inverter, DC/DC converter, etc. is a plus. Familiar with programming at processors such as TI 2407 and 2810 series, or equivalent

l         Broad know-how in developing power electronics applications like frequency inverters and dc/dc-converters

l         In-depth hardware design experience in power electronics and micro-controller circuits

l         Understanding of software operation in embedded microprocessor controllers for electric motor control or dc/dc-converter control. 

l         Expertise in the use of modeling and simulation tools such as Matlab/Simulink, Simplorer, Saber and/or PSpice

l         Highest standard of integrity.  Honest, professional, self-confident, self-disciplined

l         Excellent teamwork and interpersonal skills

l         Project management skills and strong problem solving skills

l         Oral and written English communication and presentation skills

l         Self-motivated. Flexibility to work on multiple tasks at different locations

l         Ability to work in a culturally diverse team and international customers

EDUCATION AND EXPERIENCE

l         Bachelors degree in Electrical Engineering, Mechatronics or other related engineering field required

l         Advanced degrees (master’s or PhD) preferred

l         Minimum three (3) years of relevant work experience in design, development, and testing of power electronics drives in automotive or industrial applications

混合动力汽车电机驱动工程师

工作职责：

l         明确和检验在混合动力汽车中高压电驱动部件的功能和性能需求

l         设计，实践，检验电力电子部件，如变频器和 直流-直流变换器

l         选定，计划，测试电力电子部件的包装，冷却，IGBT挑选，保护措施及连接技术

l         开发单片机控制器结构，传感器，通信接口和栅级驱动器原理及电磁兼容策略

l         研究并选定连接器系统，滤波器设计和直流母线结构

l         指定环境和功能测试，选定和支持用于电机测功仪和车辆测试的电力电子设计验证方法

l         支持质量进程，如FMEAs, DV 和 PV, 问题跟踪和换代控制。

l         与供应商，汽车客户和合作伙伴沟通，并达成技术要求。

任职资格：

l         精通永磁体电机，感应式电机和同步电机控制。

l         熟知dq0 转换，六步骤， Sine PWM，电机的空间适量运算法则 ，电机控制生产和再生产

l         具有变频器，直流-直流变换器等硬件经验者佳。熟悉处理器，如TI 2407 and 2810系列等的编程

l         具有全面电力电子应用的技术知识，如变频器和直流-直流变换器

l         资深电力电子和微型控制器电路硬件设计经验

l         了解电动马达控制或直流-直流变换器控制中的嵌入微处理器的软件操作

l         熟练建模和模拟工具如Matlab Simulink, Simplorer, Saber 和/或 PSpice的使用

l         忠诚，诚实，专业，自信，自律

l         极好的团队合作，及人际交流能力

l         项目管理技巧和出色的解疑能力

l         具有英语口语和写作交流，演讲能力。

l         具有上进心并且具有能适应在不同地区完成大量工作的能力。

l         能在多元化团队工作并且能应对国际客户。

教育背景：

l         电机工程，机械工程或其它相关工程学领域学士学位。

l         硕士或博士优先考虑

l         在汽车或工业应用的电力电子驱动方面至少3年设计，开发和测试工作经验。

6. Project Engineer for Electric Motors and Hybrid Electric Drives

DUTIES AND RESPONSIBILITIES

This Project Engineer position is responsible for mechanical development of electric motors, electric drive-unit, or hybrid electric transmissions.  Successful candidate will interface with colleagues, customers and suppliers in the development and support of hybrid-electric or electric propulsion systems.  This position requires experience with specification, development, testing and validation of electric machines for vehicle traction drive applications.  Detailed responsibilities include:

l         Specify, develop and validate electric motors (also to some degree, the power electronics motor drive as well as the systems)

l         Conduct mechanical design of electric motors with due care of quality, reliability and durability

l         Develop product drawings for prototyping and manufacture.  Ensure manufacturability of designs

l         Analyze Reliability and Durability problems, initiate corrective actions, and resolve the problems

l         Perform root cause failure analysis on mechanical and electro-mechanical systems

l         Prepare and release drawings and engineering technical documents

l         Provide product technical support to suppliers, customers as well as JJE’s internal departments

l         Identify and develop opportunities for product improvements and cost reduction

l         Prepare and present product budgets, schedules and technical status reports.

Requirements And Qualifications

l         Proficient in mechanical and electro-mechanical engineering fundamentals

l         Proficient in the use of mechanical design and analysis tools

l         Working experience with mechanical development packages such as Unigraphics and ProE

l         Knowledge in motor drive application, transmission, and trouble shooting (lab and field)

l         Experienced in design and development of systems for automotive applications

l         Experience with heat, stress and vibration modeling tools (strongly preferred)

l         Highest standard of integrity.  Honest, professional, self-confident, self-disciplined

l         Excellent teamwork and interpersonal skills

l         Project management skills and strong problem solving skills

l         Technical project leadership experience preferred

l         Oral and written English communication and presentation skills

l         Self-motivated. Flexibility to work on multiple tasks at different locations

l         Ability to work in a culturally diverse team and international customers

Education:

Bachelors degree in Mechanical Engineering

Advanced degrees (master’s or PhD) preferred

Electric motor or automotive transmission experience preferred
电机和混合动力项目工程师

工作职责：

负责电子驱动单元和混合动力装置的机械开发。在混合动力和电驱动系统方面与同事、客户和供应商进行有效沟通。规范，开发和测试汽车驱动电机应用，具体包括：

l         规范，开发，审定电机和电动汽车驱动及其程序

l         进行电机的机械设计并且考虑质量、可靠性及持久性

l         为实验和生产设计产品样图，确保设计可行性

l         分析可靠性和持久性并且进行纠错和问题解决

l         对机械和电力机械系统进行前源失败分析

l         准备和发布设计样图和工程技术文件

l         给供应商，客户和公司内部部门提供技术支持

l         发现和实施产品改良和降低成本

l         准备和呈报产品预算，进度计划以及技术状况报告

任职资格：

l         精通机械以及电力机械工程基础知识

l         熟练使用构造设计和分析工具

l         有使用Unigraphics 和 ProE 的经验

l         具备发动机驱动应用，传输，和解疑（实验室及领域）的知识

l          需具有汽车应用系统设计和开发经验

l         有高温，高压，塑膜经验者绝对优先考虑

l         忠诚，诚实，专业，自信，自律

l         极好的团队合作，及人际交流能力

l         项目管理技能以及较强的解决问题能力

l          具有技术项目领导能力

l         具有英语口语和写作交流，演讲能力。

l         具有上进心并且具有能适应在不同地区完成大量工作的能力。

l         能在多元化团队工作并且能应对国际客户。

教育背景：

l         机械工程学本科

l         机械工程硕士或博士并具有传送和电机方面的工作经验者优先考虑。

7. Manufacturing Director, Automotive Electric Motors

DUTIES AND RESPONSIBILITIES

Has overall responsibility for manufacturing and operation of high-performance electric motors for hybrid electric vehicles.

l         Evaluate manufacturing sites and recommend best locations.  Establish plants from “green field”, or acquire existing factories and re-organize/improve to meet JJE manufacturing requirements.

l         Develop requirements for plant building and capital equipment.  Develop budget for investment.

l         Develop or select manufacturing equipment and suppliers/partners for production of automotive electric motors

l         Develop production process.  Develop production cost budget.

l         Develop quality targets.  Develop and implement quality management system for both JJE and suppliers.

l         Develop and certify for basic quality standards such as ISO9000 and TS16949.

l         Develop more advanced quality processes such as Toyota production system, TQM (total quality management) and 6-Sigma.

l         Ensure on-time completion of low-volume, trial production of motor products.  Ensure high volume production launch and ramp-up on time, meeting quality targets.

l         Assist finance in estimating product cost.  Effectively monitor and control product cost.

l         Responsible for the daily operation management of the factories.  Establish and implement ERP. 

l         Establish robust purchasing systems, develop healthy supplier relationship.

l         Achieve high customer satisfaction

Requirements And Qualifications

l         Bachelor’s degree or above, major in electrical, mechanical, manufacturing or industrial engineering

l         5 to 10 years of experience in automotive electric motor production and process.  More than 3 years of plant manager experience

l         Strong quality system experience.  Business negotiation experience a plus

l         Highest standard of integrity.  Honest, professional, self-confident, self-disciplined

l         Deep knowledge in electric machine production, process, material, purchasing and quality control

l         Working experience in ISO9000 and TS16949 quality system

l         Ability to evaluate electric machine company’s capabilities

l         Ability to conduct business negotiation, business development and contract writing

l         Familiar with electric motor supply base. Have good relationship with motor suppliers

l         Excellent written and oral English communications

l         Skillful at office software such as MS OFFICE and MS PROJECT

l         Strong interpersonal skills.  Ability to lead and motive teams

l         Ability to travel about 30%-40% is required.

汽车电机制造运营总监

工作职责:

全面负责高性能混合动力驱动电机的制造和运营工作。

l         负责评估和选择汽车电机的制造地点，组建制造工厂或并购重组；

l         负责为汽车电机小批量试制选择设备及合作单位或供应商；

l         负责制定生产厂房和设备要求并编制投资预算；

l         负责制定生产工艺流程，编制生产成本预算；

l         保证汽车电机小批量试制按时完成，并且达到既定的质量要求；

l         协助财务部门进行成本估算，核算及控制；

l         针对汽车电机的特定要求，建立基本质量体系并取得认证（ISO9000，TS16949）；

l         建立并实施更先进的制造质量体系，如丰田精益生产体系，全面质量管理体系和6-希格玛等；

l         全面负责工厂的运营管理，建立健全采购体系，发展和维护供应商关系，建立高效的生产管理体制，并计划和实施ERP；

l         维持较高的客户满意度。

任职资格:

l         电机、机械、制造或工业工程专业，本科以上学历。

l         5年-10年汽车电机工艺和生产经验，3年以上工厂主管经验，并具有质量体系操作经验和商务谈判经验。

l         为人正直诚信、责任心强、工作仔细认真，原则性强；

l         熟悉电机制造工艺，材料，采购及质量控制；

l         具有评估电机企业实力的能力；

l         良好的商务谈判、业务发展和合同制定能力；

l         熟悉国内电机供应体系，并和零部件供应商有良好联系；

l         出色的英语读写和交流能力；

l         熟练使用OFFICE软件，包括PROJECT；

l         有较强的沟通协调能力，领导和激励团队的能力。

l         经常出差，大约30%-40%的工作时间。

8. Program Manager

Duties and Responsibilities

Coordinate cross-functional product development activities – from technical development to manufacturing.  Responsible for product program’s deliverable milestones, timing and execution quality

Lead the Program Execution Team (PET)

l         Serve as central point of communication and coordination with the cross-functional Program Execution Team (PET), includes engineering, manufacturing, quality, purchasing, finance, etc.

l         Assign timed deliverables to PET member.  Ensure timely and quality completions

l         Maintain project team list

l         Run weekly Project Meetings with the PET team

Program Planning, Execution and Change Management

l         Coordinate product development/production plans. Maintain master project timeline including key customer dates and internal program milestones

l         Conduct project resource planning and track resource spending

l         Coordinate development of capital spending plans, provide appropriation request for approval, and monitor/report the actual spending.  Maximize savings opportunities

l         Track product costs vs. cost targets

l         Manage changes to the program (design, process, volume, timing, etc.)

l         Schedule and facilitate program Gate Reviews of critical milestones with management

l         Manage overall program master Action Items List

l         Communicate customer Run-Offs and production schedules with PET

l         Oversee PPAP activity with manufacturing facility and purchasing

l         Communicate with operations manager regarding program changes/updates

l         Timely and accurately communicate program status and issues to the company leadership

Issue/Risk Management

l         Identify and manage program issues and risks

l         Identify issues, roadblocks and coordinate corrective actions with PET members.  Escalate critical issues to leadership for resolution

Quality

l         Oversee APQP process and documentation - requirements / timing / deliverables / milestone tracking

l         Oversee quality plan of manufactured and supplied parts

Customer interface / account manager

l         Serve as single point of contact with customer for the project

l         Coordinate periodical customer reviews

l         Communicate customer requirements and changes to PET members. Resolve or elevate customer issues

l         Assist contract negotiations.  Monitor contract execution. Ensure on-time payment

l         Maintain healthy customer relationship.  Improve customer satisfaction

Others

l         Continuously improve the product development process

Qualifications:

l         Bachelor’s degree with major in engineering.  Advanced degree in engineering or management preferred

l         Strong program management skills.  Highly organized in a fast-paced and constantly changing environment.  Five years of experience in program or project management. PMP certification preferred

l         Ability and track record to deliver program on time, on budget and meeting requirements with high quality

l         Proficient in oral and writing English.  Ability to effectively communicate with overseas customers or partners by phone in English

l         Strong coordination skills.  Ability to facilitate effective meetings both internally and with customers

l         Understand various job functions in a program.  Ability to coordinate functions through teamwork and leadership.

l         Strong interpersonal and communication skills. Ability to maintain and improve relationships within the team as well as outside customers

l         Some business development experience preferred

l         Highest standard of integrity.  Honest, professional, self-confident, self-disciplined

项目经理

工作职责:

负责协调从技术开发到产品制造跨部门的产品开发工作，负责产品开发计划阶段性目标的完成，进度安排和执行质量；

领导项目组

l         作为跨各部门项目组的关键协调人，协调有关工程、制造、质量、采购和财务等部门的项目工作；

l         按时给项目组成员分配任务，并确保能够及时并高质量的完成；

l         更新维护项目组成员名单；

l         每周召开项目组例会

项目计划、执行和变动管理

l         协调产品开发/生产计划。维持项目时间表，包括客户的关键时间点和内部阶段性计划；

l         制定项目资源计划，并跟踪资源消耗；

l         协调项目投资计划，提出项目拔款申请，监督和汇报实际开销，尽可能的节省开支

l         跟踪产品成本，并与成本目标对比

l         管理项目的变更（设计，工艺，产量，时间计划等）

l         规划项目节点报告，组织报告会

l         管理项目的行动计划

l         就试生产和产品生产计划与项目组进行交流

l         与生产和采购部门一起监督产品批准程序活动

l         关于项目变更和项目最新进度与运营经理进行交流

l         及时准确地向公司领导汇报项目进展和问题

风险管理

l         及时识别并处理项目问题和风险

l         发现问题，障碍并和项目执行小组成员一起沟通解决方案，并将重要问题提交给领导层以制定解决方案。

质量管理

l         监督产品质量前期策划过程和文档，包括项目质量需求，时间计划，任务，重要节点的跟踪

l         监督自制和由供应商提供的零部件质量计划

客户关系管理

l         作为与项目客户接触的主要渠道

l         协调与客户进行定期的项目会议

l         在客户要求及变更和项目执行小组之间进行沟通，解决或者汇报客户的问题

l         进行合同商谈，监督合同执行，确保按时回款

l         维持一个健康的客户关系，增强客户满意度。

其他

l         持续改善产品开发流程

任职资格

l         工学学士，工程专业本科。工程或管理专业研究生以上学位者优先

l         较强的项目管理技能，能在快速多变的环境下进行有组织有序地工作。5年以上项目管理工作经验。拥有PMP项目管理专业人员认证者优先

l         能按时在预算内高质量地完成项目各方面需求。

l         精通英语口语和写作，能够用英语和海外客户或者合作伙伴进行有效的沟通。（主要通过电话）

l         很强的协调能力，能够有效地组织项目组和顾客的各种会议。

l         了解在一个项目中的不同工作职责，能够通过团队精神和领导才能来协调指挥。

l         较强人际和交流技能，能够保持团队士气及外部客户的关系

l         拥有商业拓展经验者优先

l         为人正直，诚实，自信，自律。

招聘信箱：jjehr@