- 工作地点：其它
- 职位：
- 信息来源：东南大学
说明：
此信息由东南大学审核并发布（查看原发布网址），应届生求职网转载该信息只是出于传递更多就业招聘信息，促进大学生就业的目的。如您对此转载信息有疑义，请与原信息发布者东南大学核实，并请同时联系本站处理该转载信息。
Marvell Datacom R&D 2012东南大学宣讲会
发布时间：2011年09月28日 16:07
| 作者：就业指导中心
| 阅读人数：1
Marvell Datacom R&D 2012东南大学宣讲会
Marvell Datacom R&D 2012校园招聘会
宣讲时间：10月9日 18:00-21:00
宣讲地点：东南大学四牌楼校区（东南院104）
温馨须知：
1、履历投递说明：
为提高履历处理效率，目前接受电子履历应征方式。履历投递步骤如下：
Step1：将完整电子履历文件名保存为“姓名_应征职位”。
Step2：将履历及成绩单以电子邮件附件方式发送至：
longxh@
邮件主题格式为：
[2012应届][应聘职位][学校科系][学历][姓名][联系电话]
范例：[2012应届][DSP Engineer][X学校X系][硕士][张三][13XXXXXX]
切勿将履历直接贴于邮件正文内。
1、履历投递说明：
为提高履历处理效率，目前接受电子履历应征方式。履历投递步骤如下：
Step1：将完整电子履历文件名保存为“姓名_应征职位”。
Step2：将履历及成绩单以电子邮件附件方式发送至：
longxh@
邮件主题格式为：
[2012应届][应聘职位][学校科系][学历][姓名][联系电话]
范例：[2012应届][DSP Engineer][X学校X系][硕士][张三][13XXXXXX]
切勿将履历直接贴于邮件正文内。
Step3：网申地址： ma***com[点击查看]、宣讲会：机会不容错过！
宣讲流程：
前1小时 宣讲会 后1.5小时 现场笔试
1）请按时到场聆听宣讲会，我们将邀请到Marvell Datacomm R&D工程师宣讲。
2）笔试后一周内我们会通过EMAIL、电话或短信通知您面试，请保持您的通讯方
式准确、畅通。
2
宣讲流程：
前1小时 宣讲会 后1.5小时 现场笔试
1）请按时到场聆听宣讲会，我们将邀请到Marvell Datacomm R&D工程师宣讲。
2）笔试后一周内我们会通过EMAIL、电话或短信通知您面试，请保持您的通讯方
式准确、畅通。
2
About Marvell Datacomm
Marvell Datacomm Product Development Engineering Group is responsible to develop a wide range of semiconductor products used mainly in Layer 1 and Layer 2 of the Network Infrastructures. Our products are widely used by many famous companies such as Cisco, Juniper, HP, Microsoft, SONY, Intel, Huawei, ZTE, H3C and others. We were well known by the datacomm. industry by introducing the first 1000BaseT PHY with 1 Watt power consumption back in the year 2000, while the rest of the industry was running with 5 Watt PHY for such technology deployment. Today, we develop products compliant to many popular industrial standards. Take Ethernet PHY technology as an example, we have products in 10BaseT, 100BaseTX, 1000BaseT, 10GBaseT, 100BaseFX, 1000BaseX, 10GBaseR, 10GBaseW, 10GBaseLX4, 10GBaseLRM, 10GBaseKR, and many other Ethernet PHY technologies.
Job Requirements:
Job Title: DSP Engineer(MAC)
Department:Datacom R&D
Location: Shanghai
Job Description:
-We are looking for a DSP algorithm engineer with solid background in data communications and digital signal processing to join our algorithm and architecture design team. The successful candidate is expected to work in a collaborative team on cutting-edge data communication technologies. Responsibility includes development of algorithms and architecture for MAC layers and optimization of PHY-MAC design. The job requires close interaction with PHY layer design team.
Department:Datacom R&D
Location: Shanghai
Job Description:
-We are looking for a DSP algorithm engineer with solid background in data communications and digital signal processing to join our algorithm and architecture design team. The successful candidate is expected to work in a collaborative team on cutting-edge data communication technologies. Responsibility includes development of algorithms and architecture for MAC layers and optimization of PHY-MAC design. The job requires close interaction with PHY layer design team.
Qualification:
-Minimum Degree requirement: Ph.D. or M.S. in EE
-Strong knowledge on the analysis and design of data communication networks, in particular, MAC/LLC layer and IP layer protocols.
-Strong knowledge on PHY layer technologies, such as digital signal processing, and digital communication theory
-Farmiliarity with one or more home networking or wireless standards, such as IEEE P1901, G.hn, 802.11, for both PHY and MAC layer is highly desired
-Proficient in building up simulator for communication system and network
-Hands-on experience on embeded firmware development based on FPGA platforms is a plus.
-Must be a good teamplayer with other software, hardware, and digital design engineers
-Minimum Degree requirement: Ph.D. or M.S. in EE
-Strong knowledge on the analysis and design of data communication networks, in particular, MAC/LLC layer and IP layer protocols.
-Strong knowledge on PHY layer technologies, such as digital signal processing, and digital communication theory
-Farmiliarity with one or more home networking or wireless standards, such as IEEE P1901, G.hn, 802.11, for both PHY and MAC layer is highly desired
-Proficient in building up simulator for communication system and network
-Hands-on experience on embeded firmware development based on FPGA platforms is a plus.
-Must be a good teamplayer with other software, hardware, and digital design engineers
Job Title: PCB layout engineers
Department:Datacom R&D
Location: Shanghai
Job Description:
-Works closely with engineers to determine design and layout requirements, while maintaining issues of design for manufacturability and design for testability. Perform design layout of high speed/high density SMT/thru hole PCBs for data communications system.
Qualification:
-Develop symbols and CAD library databases using software design tools.
-Designs will need to follow EMI/RFI control and FCC, UL, etc. regulations.
-Generate Gerber files, test reports, electronic PCB documentation.
-Communicate with PCB fab. house to present requirement and verify returned test report.
-Create application notes on layout guidelines for various data-communication IC products.
Department:Datacom R&D
Location: Shanghai
Job Description:
-Works closely with engineers to determine design and layout requirements, while maintaining issues of design for manufacturability and design for testability. Perform design layout of high speed/high density SMT/thru hole PCBs for data communications system.
Qualification:
-Develop symbols and CAD library databases using software design tools.
-Designs will need to follow EMI/RFI control and FCC, UL, etc. regulations.
-Generate Gerber files, test reports, electronic PCB documentation.
-Communicate with PCB fab. house to present requirement and verify returned test report.
-Create application notes on layout guidelines for various data-communication IC products.
Job Title:SW Application Engineer for PLC Products
Department:Datacom R&D System Engineer
Location: Shanghai
Job Description:
-Power line communication (PLC) is one of the core communication technologies in the smart grid networks, as well as in high speed home networking to provide reliable multimedia transmission.Marvell Semiconductor Inc. is the leading provider for the PLC technology, engaged in the standardization and product development based on various outstanding PLC standards .This is an entry level, we are looking for application engineers to join our development/deployment efforts on PLC products in China as extension of Marvell PLC Design Center in Spain.
Job Responsibilities:
-Provide PLC technical support and training to consolidated customers in China for qualification and use of firmware releases
-Design and implement custom drivers, protocols and applications on top of existing product API to enable turn key solutions and shorten customer TTM
-Support Marvell Business Development, FAEs and local distributors for the pre and post-sales technical activities in China
Job Qualification:
-BS/MS in EE/CE/CS
-Must be native in Chinese and fluent in read, written, and spoken English
-Must have good C programming skills and be familiar with embedded systems
-Must have advanced technical knowledge with Ethernet based networking and TCP/IP protocols
-Working experience on firmware/software development are good assets
-Customer orientation and related experience are good assets
Department:Datacom R&D System Engineer
Location: Shanghai
Job Description:
-Power line communication (PLC) is one of the core communication technologies in the smart grid networks, as well as in high speed home networking to provide reliable multimedia transmission.Marvell Semiconductor Inc. is the leading provider for the PLC technology, engaged in the standardization and product development based on various outstanding PLC standards .This is an entry level, we are looking for application engineers to join our development/deployment efforts on PLC products in China as extension of Marvell PLC Design Center in Spain.
Job Responsibilities:
-Provide PLC technical support and training to consolidated customers in China for qualification and use of firmware releases
-Design and implement custom drivers, protocols and applications on top of existing product API to enable turn key solutions and shorten customer TTM
-Support Marvell Business Development, FAEs and local distributors for the pre and post-sales technical activities in China
Job Qualification:
-BS/MS in EE/CE/CS
-Must be native in Chinese and fluent in read, written, and spoken English
-Must have good C programming skills and be familiar with embedded systems
-Must have advanced technical knowledge with Ethernet based networking and TCP/IP protocols
-Working experience on firmware/software development are good assets
-Customer orientation and related experience are good assets
Job Title:HW Application Engineer for PLC Products
Department:Datacom R&D System Engineer
Location: Shanghai
Location: Shanghai
Job Description:
-Power line communication (PLC) is one of the core communication technologies in the smart grid networks, as well as in high speed home networking to provide reliable multimedia transmission.Marvell Semiconductor Inc. is the leading provider for the PLC technology, engaged in the standardization and product development based on various outstanding PLC standards This is an entry level, we are looking for application engineers to join our development/deployment efforts on PLC products in China as extension of Marvell PLC Design Center in Spain.
-Power line communication (PLC) is one of the core communication technologies in the smart grid networks, as well as in high speed home networking to provide reliable multimedia transmission.Marvell Semiconductor Inc. is the leading provider for the PLC technology, engaged in the standardization and product development based on various outstanding PLC standards This is an entry level, we are looking for application engineers to join our development/deployment efforts on PLC products in China as extension of Marvell PLC Design Center in Spain.
Job Responsibilities:
-Provide PLC technical support and training to consolidated customers in China during product development, certification, manufacturing and testing for production
-Conduct schematic, BOM, PCB layout reviews and benchmark customer designs with Marvell reference ones
-Create new Reference Designs combining existing Marvell reference ones to enable turn key solutions and shorten customer TTM
-Support Marvell Business Development, FAEs and local distributors for the pre and post-sales technical activities in China
Job Qualification:
- BS/MS in EE
-Must be native in Chinese and fluent in read, written, and spoken English
-Must have good understanding with circuit design, PCB layout, schematics generation, EMI solution, and usage of various lab test equipment
-Technical knowledge of networking, TCP/IP protocols and / or C programming are good assets
-Customer orientation and related experience are good assets
-Provide PLC technical support and training to consolidated customers in China during product development, certification, manufacturing and testing for production
-Conduct schematic, BOM, PCB layout reviews and benchmark customer designs with Marvell reference ones
-Create new Reference Designs combining existing Marvell reference ones to enable turn key solutions and shorten customer TTM
-Support Marvell Business Development, FAEs and local distributors for the pre and post-sales technical activities in China
Job Qualification:
- BS/MS in EE
-Must be native in Chinese and fluent in read, written, and spoken English
-Must have good understanding with circuit design, PCB layout, schematics generation, EMI solution, and usage of various lab test equipment
-Technical knowledge of networking, TCP/IP protocols and / or C programming are good assets
-Customer orientation and related experience are good assets
Job Title: Analog Design Engineer
Department: Datacom R&D
Location: Shanghai
Job Description:
Department: Datacom R&D
Location: Shanghai
Job Description:
Become a member of a world-class analog design team in providing high performance analog and mixed mode circuits for leading data communications and networking products. Designers have opportunities to design high performance transceivers and other critical analog functions, including analog-to-digital converters (ADC), digital-to-analog converters (DAC), filter, adaptive equalizers, finite-impulse response (FIR) filter, and decision-feedback equalizer (DFE). serializer-deserializer (Serdes), clock and data recovery (CDR) circuits, and phase-locked loop (PLL) or other timing circuits. Team members participate in circuit architecture, circuit implementation, design review, layout, and silicon validation..
Qualification:
Qualification:
MSEE from a reputable university with emphasis in CMOS analog/mixed-signal integrated circuit design
Ph.D. with emphasis in CMOS analog/mixed-signal integrated circuit design and implementation.
Familiar with the use of various CAD tools for design, physical layout, and verification.
Qualified candidates have design experience in one or more area of high performance CMOS circuits in the following:
Design experience in ADC, including but not limited to flash, 2-step (sub-ranging, folding), SAR, pipeline, cyclic, sigma delta, and other techniques.
Design experience in DAC for driving high precision output, such a 50ohm line driver.
Design experience in filters and/or equalization, including but not limited to continuous time filter, discrete-time filters, FIR filter, and DFE.
Design experience in Serdes and timing circuits such as PLL, CDR, TX and RX functions.
Design experience in other analog functions is a plus, such as bandgap, regulator, crystal oscillator, etc.
Knowledge in signal processing and communication theories is a plus.
Job Title: System Engineer_FPGA Oriented
Department:Datacom R&D System Engineer
Location: Shanghai
Location: Shanghai
Job Description:
We are looking for a FPGA engineer with solid background to join our system engineer team for data communication products. The successful candidate is expected to work in a collaborative team on cutting-edge data communication technologies. This position requires close interaction with the digital design team on design specification, verification and test.
Qualification:
-M.S. in Electrical Engineering or related areas. Fresh graduates are O.K.
- Familiarity with RTL digital design and FPGA emulation
- strong knowledge of hardware is also required
- Knowledge on data communication PHY, such as Ethernet or PLC, is preferred
- Good communication skills in spoken and written English
- Good at collaboration and team work
- Familiarity with RTL digital design and FPGA emulation
- strong knowledge of hardware is also required
- Knowledge on data communication PHY, such as Ethernet or PLC, is preferred
- Good communication skills in spoken and written English
- Good at collaboration and team work
Job Title: Hardware System Engineer
Department:Datacom R&D System Engineer
Location: Shanghai
Location: Shanghai
Job Description:
This is an entry level, hardware engineering oriented application engineer position. The application engineer is responsible for various post silicon engineering efforts with different kind of semiconductor products, including but not limited to: Ethernet PHY/NIC/Switch/SoC/ASIC products, high speed serial link I/O’s, DTV front end components, and so on. The engineer will be responsible for conducting various types of validation and QA tests, generating reference design and demonstration system for customers, resolving customer issues, fulfilling customers’ special requests, and supporting the marketing team on various design-win and market exploration activities.
Qualification:
-BSEE/MSEE.
-0-3 years of working experience with validation/application on semiconductor products, or design/development on data-communication systems.
- Need to have solid knowledge with Ethernet based networking technology.
- Need to have thorough understanding with general electrical engineering principles, like basic electronic circuit design, basic logic design, communication theory, high speed board design, signal integrity etc
- Knowledge with Ethernet PHY devices, L2/L3 switches, NIC cards, or embedded systems, test and measurement, test automation, etc. is highly appreciated.
- Must be willing to work in a multi-tasking, fast pace, team oriented working environment.
- Must have valid verbal and oral communication skill in English and Chinese language.
-0-3 years of working experience with validation/application on semiconductor products, or design/development on data-communication systems.
- Need to have solid knowledge with Ethernet based networking technology.
- Need to have thorough understanding with general electrical engineering principles, like basic electronic circuit design, basic logic design, communication theory, high speed board design, signal integrity etc
- Knowledge with Ethernet PHY devices, L2/L3 switches, NIC cards, or embedded systems, test and measurement, test automation, etc. is highly appreciated.
- Must be willing to work in a multi-tasking, fast pace, team oriented working environment.
- Must have valid verbal and oral communication skill in English and Chinese language.
Job Title: Software System Engineer
Department:Datacom R&D System Engineer
Location: Shanghai
Location: Shanghai
Job Description:
This is an entry level, software engineering oriented application engineer position. The application engineer is responsible for various post silicon engineering efforts with different kind of semiconductor products, including but not limited to: Ethernet PHY/NIC/Switch/SoC/ASIC products, high speed serial link I/O’s, DTV front end components, and so on. The engineer will be responsible for conducting various types of validation and QA tests, generating reference design and demonstration system for customers, reviewing customers’ designs, resolving customer issues, fulfilling customers’ special requests, and supporting the marketing team on various design-win and market exploration activities.
Qualification:
- BSEE/MSEE.
- 0-3 years of working experience with firmware or driver software development on data-communication systems.
- Working experience with PHY devices, L2/L3 switches, NIC cards, embedded systems, test and measurement, test automation, software QA, is highly appreciated.
- Need to have solid knowledge with Ethernet based networking technology.
- Need to have thorough understanding with general electrical engineering principles, like basic electronic circuit design, basic logic design, communication theory, software programming, etc.
- Must be willing to work in a multi-tasking, fast pace, team oriented working environment.
- Must have valid verbal and oral communication skill in English and Chinese language.
- BSEE/MSEE.
- 0-3 years of working experience with firmware or driver software development on data-communication systems.
- Working experience with PHY devices, L2/L3 switches, NIC cards, embedded systems, test and measurement, test automation, software QA, is highly appreciated.
- Need to have solid knowledge with Ethernet based networking technology.
- Need to have thorough understanding with general electrical engineering principles, like basic electronic circuit design, basic logic design, communication theory, software programming, etc.
- Must be willing to work in a multi-tasking, fast pace, team oriented working environment.
- Must have valid verbal and oral communication skill in English and Chinese language.
Job Title:System Engineer_Firmware Oriented
Department:Datacom R&D System Engineer
Location: Shanghai
Job Description:
This is an entry level, firmware oriented system engineer position. The successful candidate will participate in the firmware design and implementation for SOHO switch, router and SOC products. The scope ranges from kernel, boot code, BSP, drivers, to application software. Responsibility also includes QA and customer support. On-site customer visit may be required. In addition to R&D activities, the engineer will also perform technical support to sales and marketing teams, engaging customer related activities. These activities include but not limited to generating reference design and demonstration system for customers, reviewing customers’ designs, resolving customer issues, fulfilling customers’ special requests, and supporting design-win and market exploration.
Department:Datacom R&D System Engineer
Location: Shanghai
Job Description:
This is an entry level, firmware oriented system engineer position. The successful candidate will participate in the firmware design and implementation for SOHO switch, router and SOC products. The scope ranges from kernel, boot code, BSP, drivers, to application software. Responsibility also includes QA and customer support. On-site customer visit may be required. In addition to R&D activities, the engineer will also perform technical support to sales and marketing teams, engaging customer related activities. These activities include but not limited to generating reference design and demonstration system for customers, reviewing customers’ designs, resolving customer issues, fulfilling customers’ special requests, and supporting design-win and market exploration.
Qualification:
- MS in Computer Science or Electric Engineering
- 0-3 years of working experience in the areas of embedded system design of data communication products
- Experience with various OS such as embedded Linux
- Fluent in C, knowledge in an assembler language
- Knowledge with computer architecture, such as ARM
- Excellent verbal and oral communication skill in both English and Chinese.
- Willing to work in a multi-tasking, fast pace, team oriented working environment.
- MS in Computer Science or Electric Engineering
- 0-3 years of working experience in the areas of embedded system design of data communication products
- Experience with various OS such as embedded Linux
- Fluent in C, knowledge in an assembler language
- Knowledge with computer architecture, such as ARM
- Excellent verbal and oral communication skill in both English and Chinese.
- Willing to work in a multi-tasking, fast pace, team oriented working environment.
Job Title: DSP Engineer
Department:Datacom R&D System Engineer
Location: Shanghai
Job Description:
We are looking for a DSP engineer with solid background in digital communication and signal processing to join our algorithm and architecture design team for data communication products. The successful candidate is expected to work in a collaborative team on cutting-edge data communication technologies. Responsibility includes designing algorithm and fixed point architecture for the PHY implementation. This position also requires close interaction with the digital design team on design specification, verification and test.
Qualification:
- M.S.or Ph.D in Electrical Engineering or related areas. Fresh graduates are O.K.
-Must have strong knowledge of digital communication and signal processing theory
- Proficient in building up communication system simulator with C/C and Matlab
- Knowledge on data communication PHY, such as Ethernet or PLC, is preferred
- Familiarity with RTL digital design and FPGA emulation is a plus
- Good communication skills in spoken and written English
- Good at collaboration and team work
Department:Datacom R&D System Engineer
Location: Shanghai
Job Description:
We are looking for a DSP engineer with solid background in digital communication and signal processing to join our algorithm and architecture design team for data communication products. The successful candidate is expected to work in a collaborative team on cutting-edge data communication technologies. Responsibility includes designing algorithm and fixed point architecture for the PHY implementation. This position also requires close interaction with the digital design team on design specification, verification and test.
Qualification:
- M.S.or Ph.D in Electrical Engineering or related areas. Fresh graduates are O.K.
-Must have strong knowledge of digital communication and signal processing theory
- Proficient in building up communication system simulator with C/C and Matlab
- Knowledge on data communication PHY, such as Ethernet or PLC, is preferred
- Familiarity with RTL digital design and FPGA emulation is a plus
- Good communication skills in spoken and written English
- Good at collaboration and team work
Job Title: ASIC Design Engineer
Department:Datacom Digital Design
Location: Shanghai
Location: Shanghai
Description:
- Successful candidates will join the ASIC design team in Datacom R&D and work on new products for data communications. He or she will participate in various aspects of product development and be responsible for micro-architecture design, RTL implementation and verification, logic synthesis, timing analysis, test pattern generation and silicon validation.
- Successful candidates will join the ASIC design team in Datacom R&D and work on new products for data communications. He or she will participate in various aspects of product development and be responsible for micro-architecture design, RTL implementation and verification, logic synthesis, timing analysis, test pattern generation and silicon validation.
Qualification:
-MSEE with good GPA standings; Knowledge of logic design using hardware description language (preferably Verilog) and common ASIC design tools;
-Knowledge of communication protocols such as Ethernet is preferred;
-Good communication skills. Proficiency of English and able to communicate fluently in English in both verbal and written forms.
-MSEE with good GPA standings; Knowledge of logic design using hardware description language (preferably Verilog) and common ASIC design tools;
-Knowledge of communication protocols such as Ethernet is preferred;
-Good communication skills. Proficiency of English and able to communicate fluently in English in both verbal and written forms.
如何写一份简单、直接、高效的求职信？
千里之行，始于足下。 %bbs.yingjiesheng.com%
