南京爱立信熊猫通信有限公司招聘信息

 

公司简介：

        爱立信是网络社会的驱动力量。作为全球领先的通信技术与服务提供商，爱立信与全球运营商们携手合作，不断激发人、商业和社会的潜能，共同塑造可持续发展的未来世界。

       爱立信的服务、软件和基础设施，推动着移动性、宽带和云这三大力量的发展，正帮助电信运营商和其它行业客户开拓业务、提升效率、改善用户体验并抓住新机遇。

      爱立信在全球180个国家开展业务，其全球规模、技术与服务领导力构筑了公司的强大竞争力。爱立信所支持的网络连接着25亿用户，全球40%以上的移动流量经由爱立信的网络。爱立信对研发的巨额投入更确保了其解决方案与客户伙伴屹立于行业潮头

      南京爱立信熊猫通信有限公司，成立于1992年，是爱立信在中国的第一家合资企业。目前有员工2000多名，是爱立信全球最大的生产供应中枢、重要的研发中心和新产品引进基地，在爱立信全球战略中发挥着举足轻重的作用！

 

目前公司针对2017届毕业生招聘岗位如下：

招聘岗位

 

1、 Product Engineer 产品工程师 (Ericsson/爱立信）   

 

Job Summary  工作概述

To provide effective and efficient product and test technical support for New Product Introduction, Transfer Product Introduction as well as in-house volume production, in terms of product failure analysis, internal/external claim analysis, FRAG (Failure Rate Analysis Group) activities and continuous improvement and innovation activities, so as to improve product performance and product test yield.

为新产品引入，转移产品引入和内部量产提供有效果和效率的技术支持，在产品故障分析、内部/外部索偿分析，和FRAG（故障率分析小组）事项方面持续改进和创新，从而提高产品的性能和产品测试合格率。

Responsibilities & Tasks  工作职责

· Act as owner of radio product (LTE, WCDMA & GSM) knowledge and troubleshooting/repair competence in Production/Supply and act as technical bridge between product R&D and Production/Supply.

在生产/供应链端作为无线产品（LTE, WCDMA, GSM）知识和问题解决/修复能力的所有者，同时作为研发和生产/供应链之间的技术桥梁。

 

· Provide design & manufacturing related technical support to NPI (New Product Introduction),TPI (Transfer Product Introduction), in-house volume production, other Ericsson Supply Sites and EMS (Electronic Manufacturing Service).

为NPI, TPI, 量产和爱立信其他供应中心以及EMS工厂提供设计和制造相关的技术支持。

· Provide training & technical support to repair centers in Ericsson globally.

为爱立信全球的修理中心提供培训和技术支持。

· Lead the failure analysis for products failed in-house production, on customer side and in manufacturing process.

负责内部生产、客户端和制造工艺中的失效产品的故障分析。

Be the key member of FRAG (Failure Rate Analysis Group) to drive the failure analysis and find the technical root cause and/or solutions of critical issues

作为FRAG（故障率分析小组）的主要成员，推进故障分析并找出技术相关根本原因和关键问题的解决方案。

Contact PDU (Product Design Unit) closely to report critical hardware problems found in production, site or EMS and work with PDU to provide solutions.

与PDU（产品设计单元）保持紧密联系，汇报在生产中心或EMS工厂在生产过程中发现的关键的硬件问题，并和PDU协同提供解决方案。

Instruct and certify trouble shooters and provide technical support if needed.

指导和认证故障检修员，在需要时提供技术支持。

Support product quality improvement with the close collaboration with Production Quality Engineer, Product Quality Leader, Customer Quality Manager and Supplier Quality Engineer.

与生产质量工程师，产品质量负责人，客户质量经理和供应商质量工程师保持密切合作，为产品质量改进提供支持。

Work on the implementation of Change Request and product verification; be responsible for verification report with input from relevant functions.

负责产品变更和产品验证的实施；负责根据相关部门提供的信息完成验证报告。

· Drive continuous improvement and innovation in product and test from Production/Supply side.

从生产和供应链端推动产品和测试技术的改进与创新

· Collaborate with PDU (Product Design Unit) to perform reliability test to improve product robustness

与PDU（产品设计单位）合作，进行产品可靠性试验，以提高产品的稳定性。

· Fulfill Design Verification Test, elaboration test of filter or other technical/quality support based on PDU assignments

基于PDU的安排，实现产品设计验证测试、滤波器精密测试以及其他技术、质量方面的支持。

 

 

Position Qualification  职位要求

· University degree in Electronics/Electrical Engineering, Telecommunication or equivalent 

电气/电子工程、通信或相关专业本科毕业

· Comprehensive understanding of RF and RF design. RF design experience will be nice plus.

对RF与RF设计有全面的了解，有RF设计经验者优先

· A minimum of two years working experience at least in one of following areas such as Transceiver, Antenna, Filter or Power Amplifier

在收发器、天线、滤波器或功率放大器等至少一个领域有两年及以上工作经

· Proficient with operation of RF instruments such as signal generator, vector network analyzer, spectrum analyzer and power meter etc.

熟练操作RF仪器，如信号发生器，矢量网络分析仪，频谱分析仪和功率计等

· Fluent oral and written communications in both Chinese and English

流利的中、英文口头和书面交流能力

· Proven good record of accountability, open mind, learning capacity, team working spirit and problem solving attitude

具有良好的责任心，思路开阔，学习能力强，富有团队合作精神和解决问题的态度

 

 

2、 PTD Test Developer (131008) PTD测试开发工程师

 

Position Summary 工作概述

PTD (Production Test Development) test developer is to work in, and contribute to the PTD projects in the test technology department. We are aiming to deliver cost efficient HW test system for mass production. This work must be performed in close cooperation with members of Ericsson PDU (Product Design Unit) and NPI (New Product Introduction) projects, as well as with members of Ericsson test development units that exist outside China; this position is to research, specify, implement, verify and maintain test system by:

PTD（生产测试开发部）开发工程师主要负责参与并有助于测试技术部的生产测试开发项目。我们的目标是为量产提供经济高效的硬件测试系统。这项工作必须与爱立信PDU（产品设计部门）和NPI（新产品引入）项目两个部门的成员保持密切合作，也包括在中国以外的爱立信测试开发部门成员；本职位是工作内容为研究、制定、实施、验证和维护测试系统，包含：

 

· Focusing on test SW development, test HW& SW integration and test solution implementation for Ericsson products;

专注于爱立信产品的测试软件的开发，测试硬件软件集成和测试解决方案；

· Committing project cost and time-plan targets, as well as test-coverage, test-yield and test-time targets, within the PTD projects

负责生产测试开发项目的成本、时间计划指标，以及测试覆盖率、测试通过率和测试时间指标。

 

Responsibilities & Tasks:工作职责

· Support PTD project manager for project integration work, such as budgeting, planning, target setting, risk analysis, technical study, etc.

配合PTD项目经理开展项目集成工作，如预算、规划、目标设定、风险分析、技术研究等

· Learn Ericsson product knowledge in PTD project and feedback to product design by focusing on product testability

在PTD项目中学习了解爱立信产品，并通过产品的可测试性提供反馈给产品开发部门

· Ensure that standard details and platform software modules are used when advantages are obtained

确保在标准细节和平台软件模块应用中获得优处

· Use standardized design strategy and contribute common test software solution to platform

使用标准化的设计策略，为平台提供通用测试软件解决方案

· Be responsible for test system release according to project development process, cover the whole product life circle

负责项目开发过程中测试系统发布，并覆盖整个产品生命周期

· Execute test solution implementation and test system integration

执行测试解决方案的实施和测试系统集成

· Actively contribute in test fault analysis and solve test related problem

积极参与故障分析以，并解决测试相关的问题

· Improve test system performance constantly, by focusing on test system stability and reliability

通过专注于测试系统的稳定性和可靠性不断提高测试系统的性能

 

Qualifications:职位要求

· Good knowledge and experience with C# programming languages

良好的C#语言知识和经验

· Good knowledge of telecommunication and measurement instrumentation

丰富的电信和相关测量仪器知识

· Good problem analysis and solving skills

良好的问题分析和解决能力

· Proficient in English

流利的英语

· Experience in telecommunication industry, know about wireless system and theory is a plus.

有电信行业工作经验，了解无线系统和理论者优先。

· Experience in measurement system integration is a plus.

测量系统集成经验者优先

· SW architecture ability is a plus.

会SW架构者优先。

· Data statistic skill is a plus.

擅长数据统计者优先

 

 

应聘联系方式:

投递简历至邮箱：rocky.li@

或登录网站：ww***com[点击查看] 申请。